£25.99 GBP


Membership Price from £15.99 GBP.
(Not applicable with discount codes)

Product Features
  • Tough and Durable
  • Good Heat & Freezing Resistance
  • Comes with High Temperature Reusable Spool
  • Diameter: 1.75mm +/- 0.03mm

Cautions for Use
  • AMS Compatible
  • Enclosure Printers Required
Color: ABS Beige (40401)
£25.99 GBP

Order Info
  • Order will be shipped out from UK warehouse in 1-3 business days once being processed
  • Free shipping on orders over £45
图片加载失败文案 图片加载失败文案

Accessory Compatibility

Recommended Not Recommended
Build Plate Engineering Plate, High Temperature Plate or Textured PEI Plate Cool Plate
Hotend All Size / Material /
Glue Bambu Liquid Glue
Glue Stick

ABS Hex Code Table

Color Hex Code Display
Beige #DFD1A7
Lavender #7248BD
Olive #789D4A
Tangerine Yellow #FFC72C
Azure #489FDF
Navy Blue #0C2340
Silver #87909A
Red #D32941
Orange #FF6A13
Yellow #FCE900
Mint #7AE1BF
Bambu Green #00AE42
Blue #0A2CA5
Purple #AF1685
Black #000000

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

图片加载失败文案 图片加载失败文案

Recommended Printing Settings
Drying Settings (Blast Drying Oven) 80 °C,8 h
Printing and Keeping Container's Humidity < 20% RH (Sealed,with Desiccant)
Nozzle Temperature 240 - 270 °C
Bed Temperature (with Glue) 80 - 100 °C
Printing Speed < 300 mm/s
Physical Properties
Density 1.05 g/cm³
Vicar Softening Temperature 94 °C
Heat Deflection Temperature 87 °C
Melting Temperature 200 °C
Melt Index 34.2 ± 3.8 g/10 min
Mechanical Properties
Tensile Strength 33 ± 3 MPa
Breaking Elongation Rate 10.5 ± 1.0 %
Bending Modulus 1880 ± 110 MPa
Bending Strength 62 ± 4 MPa
Impact Strength 39 ± 3.6 kJ/m²

Printing Tips

• Pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area.

• Recommended to dry out before use to get higher printing quality and the recommended drying condition is 80 ℃ for 8 hours in a blast drying oven, or 100 ℃ for 12 hours on a printer's heatbed. For more details please refer to: Filament drying cover on WIKI.

• ABS is prone to warping when printing large size and/or high infill density model. To avoid warping: 1) Not recommemded to print too large size and/or high infill density model. 2) Use enclosure printers and ensure the build plate is properly glued before printing. 3) Set lower printing speed and higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on WIKI.

What's in the Box:

abs filament abs filament

Filament*1 & Desiccant*1

abs filament abs filament

Instructions*1 & Spool Sticker*1

abs filament abs filament


abs filament abs filament

Filament Label*1

图片加载失败文案 图片加载失败文案

Print Your Own Spool Now

Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!

图片加载失败文案 图片加载失败文案

2.If you don't have the spool model in your printer,

Instructions for Printed Spool

abs filament abs filament

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

abs filament abs filament

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

abs filament abs filament

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

abs filament abs filament

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.