The Bambu Lab hotend features a unique all-in-one design that combines the heatsink, throat, heater block, and nozzle into a single unit. With this design, Bambu Lab hotends can heat up much faster than traditional hotends and avoid the risk of filament oozing or leaking at the nozzle and heat break interface.
| Material | 0.2 mm Nozzle | 0.4 mm Nozzle | 0.6 mm Nozzle | 0.8 mm Nozzle | Hardened Steel Required? |
| General PLA | YES | YES | YES | YES | Optional |
| Wood/Rock/Metal-filled PLA | *NO | YES | YES | YES | Optional |
| PETG | YES | YES | YES | YES | Optional |
| PVA | YES | YES | YES | YES | Optional |
| ABS | YES | YES | YES | YES | Optional |
| ASA | YES | YES | YES | YES | Optional |
| ASA | YES | YES | YES | YES | Optional |
| PC | YES | YES | YES | YES | Optional |
| PA | *NO | YES | YES | YES | Optional |
| TPU | *NO | YES | YES | YES | Optional |
| PLA-CF | *NO | *Highly Recommended |
YES | YES | *Required |
| PETG-CF | *NO | *Highly Recommended |
YES | YES | *Required |
| PAHT-CF | *NO | YES | *Highly Recommended |
YES | *Required |
| PET-CF | *NO | YES | *Highly Recommended |
YES | *Required |
- Hotend with Nozzle
- Thermal Grease * 1
- M3-14 Step Screws * 2
X1 Series, P1P
| Max. Printing Temp. | 300 ℃ | Length | 47.3 mm |
| Packaging Weight | 30 g | Packaging Size | 190*70*50 mm |